How To Maintain Powder Packaging Machine Correctly?

• source: baopackauto;
• Time: 2019-01-11
• 分享：

The current times is automation, various packaging equipment has gradually entered the ranks of automation, and our powder packaging machine is not willing to lag behind, so large vertical powder packaging machine, multi-row powder packaging machine listed, has been unanimously recognized by major enterprises, but also widely put into the market, greatly helping enterprises to save labor costs. It improves the quality of production. Such ascoffee powder packing machine,洗衣粉包装机。

But there are often many enterprises do not understand the importance of machine maintenance and maintenance methods. Powder packaging machine must pay attention to daily maintenance and maintenance, because this can not only prolong the service life of equipment, but also the equipment itself will not cause failure and so on.So for the maintenance and maintenance of powder packaging machine, we would like to give you a few suggestions:

1.油润滑：

齿轮啮合点，带座椅和移动部件的轴承注入孔应定期用油润滑。每班次一次，严禁减速机没有石油。在填充润滑剂时，请注意不要将油箱放在旋转带上，以避免滑动，投掷或过早老化带和损坏。

要注意的另一点是，当没有油时，减速器不能运行，而第一次运行后300小时，用新的油清洁内部并用新的油代替，然后每2500小时改变油。当润滑油时，不要将油滴放在驱动带上，因为这将导致粉末包装机的滑动和损失或皮带的过早老化损坏。

2. Clean regularly:

After shutdown, the metering part should be cleaned in time, and the heat-sealing body should be cleaned regularly, especially the packaged materials with high sugar content in some granules. It is better to clean the turntable and the discharging gate. The heat-sealing body also needs to be cleaned regularly to ensure that the sealing lines of the packaged products are clear. For the scattered materials, it should be cleaned in time, so as to facilitate the cleaning of the machine parts and thus prolong the packing better. Service life, but also often clean the dust in the electronic control box, in order to prevent short circuit or poor contact and other electrical failures.

3.Maintenance of machines:

Maintenance of powder packaging machine is one of the keys to prolong the service life of the packaging machine. Therefore, it is necessary to check the screw in all parts of the powder packaging machine regularly without loosening. Otherwise, it will affect the normal rotation of the whole machine. Waterproof, moisture-proof, anti-corrosion and rat-proof should be paid attention to in the electrical parts of the machine to ensure the cleanliness of the electric control box and the wiring terminals in order to prevent electrical failure. After the shutdown of the machine, the screw should be made loose. The two heat sealers are in an open position to prevent scalding of packaging materials.

The above suggestions on the maintenance methods of powder packaging machine hope to bring help to you. Powder packaging machine is a very important position in the production and operation of enterprises. Once the machine fails, it will delay the production period. Therefore, the maintenance and maintenance of the machine is very important, hoping to attract the attention of enterprises.