What is the cause of the failure of the quantitative packaging machine?

• source: Willa He;
• Time: 2021-03-31
• Share:

Quantitative packaging machine is a packaging machine that includes four major components: automatic weighing device, conveying device, sewing device, and computer control system. However, when it is used, its quantitative device will fail, so what is the cause of the phenomenon?

在检查定量包装机的工作状态的过程中，发现从定量杯中进入定量包装机容器的材料的过程并不光滑，这可能会被通道，不良的排气和排气所阻止应检查填充嘴和包装容器的嘴，等等，等等，应检查阻塞原因并调整包装定位设备。定量包装机的定量测量杯可能不满。测量杯的容量被错误地调整；料斗的喂养太慢或不稳定。料斗的载荷表面太低。喂食管太小，材料流不光滑；喂食管和测量杯的等待方式不同。还可能使重新循环充电机的运行速度太快，并且从料斗中掉落的材料的速度太快了。

In addition to the above factors, the adjustment of the expansion mechanism of the excessive return flow cup is improper; the overflow of the material container is not concentric with the feeding tube, the beat is not accurate, the container is too small or the material in the feeding tube causes the feeding to lag; the spiral speed is very low or the speed is Unstable materials are too private, or the screw rotation setting is too large and the materials are crowded, resulting in abnormal rotation, etc., which will also cause the channel of the quantitative packaging machine to be blocked. In other words, its clutch is not working properly or the belt is loose. You should refer to the clutch instruction manual to check and adjust the clutch or tighten the belt. If the counter does not count, the encoder connection may be faulty or the coupling on the encoder is loose or the coupling is broken.